Primer system that fights your corrosion battles for you.

Awlgrip 545 is a two-component epoxy primer system with corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates above or below the waterline. The two-part system consists of a base and converter, and is used to seal filler primers and fairing work before applying topcoats.

Key Features:

• Excellent corrosion and adhesion properties

• Use where high build and filling is required 

• Used to seal filler primers

• Gives an ideal undercoat for all Awlgrip topcoats

Physical Data:

• Type: Epoxy Polyamide

• Formulation:  Top/Bottom epoxy primer 

• Components: 2

• VOC: 435 g/lt

Application:

• Recommended Application Method: Conventional or airless spray and brush/roller

• Number of coats recommended: 2-3 

• Induction Time after Mixing: 15 Minutes

• Recommended Wet Film Thickness: 7-10 mils

• Recommended Dry Film Thickness: 2-3 mils

• Application Temperature: minimum 13°C (55°F), maximum 41°C (105°F).

• Primer Needed:  Ultra Build Primer

• Coverage:  497 Sq. feet/gallon

• Converter:  AwlGrip (D3001)

• Cleaner: T0006, T0002, Reducers