Many professionals consider Awlgrip Two-Part Linear Polyurethane to be the benchmark by which other topcoats are measured.
Famous for its high gloss and chip-resistant durability, Awlgrip two-part polyurethane enamel provides resin-rich, clean, bright color. May be applied by brush, spray or roller when used with the appropriate converters. Awlgrip paints are lead-free and comply with Federal regulations. Recommended only for professional applicators using proper safety equipment. Alwgrip Two-Part Linear Polyurethane should not be applied below the waterline. Once it cures, it requires very little maintenance and should not be waxed, buffed, compounded or polished.
Key Features:
High performance polyester urethane topcoat system
Can be applied by spray or "roll and tip" methods
Excellent color retention and chemical resistance
Superior flow and leveling
Tough and durable with outstanding longevity
Repairable; conventional polyester urethanes can sometimes be difficult to repair
For above-the-waterline application on properly prepared and primed fiberglass, wood, steel and aluminum substrates
Physical Data:
Base Formulation: To-component linear aliphatic polyester polyurethane
Finish: High gloss
VOC Base: 470g/l or 3.9lb./gallon
VOC Spray Converter: (G3010) 591g/l or 4.9 lb./gallon
VOC Brush Converter: (H3002) 276g/l or 2.3lb./gallon
Application:
Recommended Application Method: Brush, roller or spray
Number of Coats Recommended: Spray: 2-3; Brush or roller: 2
Primer Needed: Spray: 545 Primer; Brush or roller: AwlQuick Primer
Drying Time to Recoat: Spray: 1-4hrs.; Brush or roller: At least 16hrs.
Drying Time to Full Cure: 14 days
Coverage: Spray: 530sq.ft./gal.; Brush or roller: 700-725 sq.ft/gal.
Converters/Reducers/Accelerators: Selected according to application method (brush or spray), ambient temperature and other factors
Converters
Awlgrip two-part painting systems require the mixing of a base and a converter. Converters are sold separately.
For spray applications, Awlgrip is mixed in a ratio of 1:1, one part base to one part converter. (G3010).
For brush applications, Awlgrip is mixed in a ratio of 2:1, two parts base to 1 part converter. (H3002).
